Miscellaneous

Layout of State Variables in Storage

Statically-sized variables (everything except mapping and dynamically-sized array types) are laid out contiguously in storage starting from position 0. Multiple items that need less than 32 bytes are packed into a single storage slot if possible, according to the following rules:

  • The first item in a storage slot is stored lower-order aligned.
  • Elementary types use only that many bytes that are necessary to store them.
  • If an elementary type does not fit the remaining part of a storage slot, it is moved to the next storage slot.
  • Structs and array data always start a new slot and occupy whole slots (but items inside a struct or array are packed tightly according to these rules).

Warning

When using elements that are smaller than 32 bytes, your contract’s gas usage may be higher. This is because the EVM operates on 32 bytes at a time. Therefore, if the element is smaller than that, the EVM must use more operations in order to reduce the size of the element from 32 bytes to the desired size.

It is only beneficial to use reduced-size arguments if you are dealing with storage values because the compiler will pack multiple elements into one storage slot, and thus, combine multiple reads or writes into a single operation. When dealing with function arguments or memory values, there is no inherent benefit because the compiler does not pack these values.

Finally, in order to allow the EVM to optimize for this, ensure that you try to order your storage variables and struct members such that they can be packed tightly. For example, declaring your storage variables in the order of uint128, uint128, uint256 instead of uint128, uint256, uint128, as the former will only take up two slots of storage whereas the latter will take up three.

The elements of structs and arrays are stored after each other, just as if they were given explicitly.

Due to their unpredictable size, mapping and dynamically-sized array types use a Keccak-256 hash computation to find the starting position of the value or the array data. These starting positions are always full stack slots.

The mapping or the dynamic array itself occupies an (unfilled) slot in storage at some position p according to the above rule (or by recursively applying this rule for mappings to mappings or arrays of arrays). For a dynamic array, this slot stores the number of elements in the array (byte arrays and strings are an exception here, see below). For a mapping, the slot is unused (but it is needed so that two equal mappings after each other will use a different hash distribution). Array data is located at keccak256(p) and the value corresponding to a mapping key k is located at keccak256(k . p) where . is concatenation. If the value is again a non-elementary type, the positions are found by adding an offset of keccak256(k . p).

bytes and string store their data in the same slot where also the length is stored if they are short. In particular: If the data is at most 31 bytes long, it is stored in the higher-order bytes (left aligned) and the lowest-order byte stores length * 2. If it is longer, the main slot stores length * 2 + 1 and the data is stored as usual in keccak256(slot).

So for the following contract snippet:

contract C {
  struct s { uint a; uint b; }
  uint x;
  mapping(uint => mapping(uint => s)) data;
}

The position of data[4][9].b is at keccak256(uint256(9) . keccak256(uint256(4) . uint256(1))) + 1.

Layout in Memory

Solidity reserves three 256-bit slots:

  • 0 - 64: scratch space for hashing methods
  • 64 - 96: currently allocated memory size (aka. free memory pointer)

Scratch space can be used between statements (ie. within inline assembly).

Solidity always places new objects at the free memory pointer and memory is never freed (this might change in the future).

Warning

There are some operations in Solidity that need a temporary memory area larger than 64 bytes and therefore will not fit into the scratch space. They will be placed where the free memory points to, but given their short lifecycle, the pointer is not updated. The memory may or may not be zeroed out. Because of this, one shouldn’t expect the free memory to be zeroed out.

Layout of Call Data

When a Solidity contract is deployed and when it is called from an account, the input data is assumed to be in the format in the ABI specification. The ABI specification requires arguments to be padded to multiples of 32 bytes. The internal function calls use a different convention.

Internals - Cleaning Up Variables

When a value is shorter than 256-bit, in some cases the remaining bits must be cleaned. The Solidity compiler is designed to clean such remaining bits before any operations that might be adversely affected by the potential garbage in the remaining bits. For example, before writing a value to the memory, the remaining bits need to be cleared because the memory contents can be used for computing hashes or sent as the data of a message call. Similarly, before storing a value in the storage, the remaining bits need to be cleaned because otherwise the garbled value can be observed.

On the other hand, we do not clean the bits if the immediately following operation is not affected. For instance, since any non-zero value is considered true by JUMPI instruction, we do not clean the boolean values before they are used as the condition for JUMPI.

In addition to the design principle above, the Solidity compiler cleans input data when it is loaded onto the stack.

Different types have different rules for cleaning up invalid values:

Type Valid Values Invalid Values Mean
enum of n members 0 until n - 1 exception
bool 0 or 1 1
signed integers sign-extended word currently silently wraps; in the future exceptions will be thrown
unsigned integers higher bits zeroed currently silently wraps; in the future exceptions will be thrown

Esoteric Features

There are some types in Solidity’s type system that have no counterpart in the syntax. One of these types are the types of functions. But still, using var it is possible to have local variables of these types:

contract FunctionSelector {
  function select(bool useB, uint x) returns (uint z) {
    var f = a;
    if (useB) f = b;
    return f(x);
  }

  function a(uint x) returns (uint z) {
    return x * x;
  }

  function b(uint x) returns (uint z) {
    return 2 * x;
  }
}

Calling select(false, x) will compute x * x and select(true, x) will compute 2 * x.

Internals - The Optimizer

The Solidity optimizer operates on assembly, so it can be and also is used by other languages. It splits the sequence of instructions into basic blocks at JUMPs and JUMPDESTs. Inside these blocks, the instructions are analysed and every modification to the stack, to memory or storage is recorded as an expression which consists of an instruction and a list of arguments which are essentially pointers to other expressions. The main idea is now to find expressions that are always equal (on every input) and combine them into an expression class. The optimizer first tries to find each new expression in a list of already known expressions. If this does not work, the expression is simplified according to rules like constant + constant = sum_of_constants or X * 1 = X. Since this is done recursively, we can also apply the latter rule if the second factor is a more complex expression where we know that it will always evaluate to one. Modifications to storage and memory locations have to erase knowledge about storage and memory locations which are not known to be different: If we first write to location x and then to location y and both are input variables, the second could overwrite the first, so we actually do not know what is stored at x after we wrote to y. On the other hand, if a simplification of the expression x - y evaluates to a non-zero constant, we know that we can keep our knowledge about what is stored at x.

At the end of this process, we know which expressions have to be on the stack in the end and have a list of modifications to memory and storage. This information is stored together with the basic blocks and is used to link them. Furthermore, knowledge about the stack, storage and memory configuration is forwarded to the next block(s). If we know the targets of all JUMP and JUMPI instructions, we can build a complete control flow graph of the program. If there is only one target we do not know (this can happen as in principle, jump targets can be computed from inputs), we have to erase all knowledge about the input state of a block as it can be the target of the unknown JUMP. If a JUMPI is found whose condition evaluates to a constant, it is transformed to an unconditional jump.

As the last step, the code in each block is completely re-generated. A dependency graph is created from the expressions on the stack at the end of the block and every operation that is not part of this graph is essentially dropped. Now code is generated that applies the modifications to memory and storage in the order they were made in the original code (dropping modifications which were found not to be needed) and finally, generates all values that are required to be on the stack in the correct place.

These steps are applied to each basic block and the newly generated code is used as replacement if it is smaller. If a basic block is split at a JUMPI and during the analysis, the condition evaluates to a constant, the JUMPI is replaced depending on the value of the constant, and thus code like

var x = 7;
data[7] = 9;
if (data[x] != x + 2)
  return 2;
else
  return 1;

is simplified to code which can also be compiled from

data[7] = 9;
return 1;

even though the instructions contained a jump in the beginning.

Source Mappings

As part of the AST output, the compiler provides the range of the source code that is represented by the respective node in the AST. This can be used for various purposes ranging from static analysis tools that report errors based on the AST and debugging tools that highlight local variables and their uses.

Furthermore, the compiler can also generate a mapping from the bytecode to the range in the source code that generated the instruction. This is again important for static analysis tools that operate on bytecode level and for displaying the current position in the source code inside a debugger or for breakpoint handling.

Both kinds of source mappings use integer indentifiers to refer to source files. These are regular array indices into a list of source files usually called "sourceList", which is part of the combined-json and the output of the json / npm compiler.

The source mappings inside the AST use the following notation:

s:l:f

Where s is the byte-offset to the start of the range in the source file, l is the length of the source range in bytes and f is the source index mentioned above.

The encoding in the source mapping for the bytecode is more complicated: It is a list of s:l:f:j separated by ;. Each of these elements corresponds to an instruction, i.e. you cannot use the byte offset but have to use the instruction offset (push instructions are longer than a single byte). The fields s, l and f are as above and j can be either i, o or - signifying whether a jump instruction goes into a function, returns from a function or is a regular jump as part of e.g. a loop.

In order to compress these source mappings especially for bytecode, the following rules are used:

  • If a field is empty, the value of the preceding element is used.
  • If a : is missing, all following fields are considered empty.

This means the following source mappings represent the same information:

1:2:1;1:9:1;2:1:2;2:1:2;2:1:2

1:2:1;:9;2::2;;

Using the Commandline Compiler

One of the build targets of the Solidity repository is solc, the solidity commandline compiler. Using solc --help provides you with an explanation of all options. The compiler can produce various outputs, ranging from simple binaries and assembly over an abstract syntax tree (parse tree) to estimations of gas usage. If you only want to compile a single file, you run it as solc --bin sourceFile.sol and it will print the binary. Before you deploy your contract, activate the optimizer while compiling using solc --optimize --bin sourceFile.sol. If you want to get some of the more advanced output variants of solc, it is probably better to tell it to output everything to separate files using solc -o outputDirectory --bin --ast --asm sourceFile.sol.

The commandline compiler will automatically read imported files from the filesystem, but it is also possible to provide path redirects using context:prefix=path in the following way:

solc github.com/ethereum/dapp-bin/=/usr/local/lib/dapp-bin/ =/usr/local/lib/fallback file.sol

This essentially instructs the compiler to search for anything starting with github.com/ethereum/dapp-bin/ under /usr/local/lib/dapp-bin and if it does not find the file there, it will look at /usr/local/lib/fallback (the empty prefix always matches). solc will not read files from the filesystem that lie outside of the remapping targets and outside of the directories where explicitly specified source files reside, so things like import "/etc/passwd"; only work if you add =/ as a remapping.

You can restrict remappings to only certain source files by prefixing a context.

The section on Importing other Source Files provides more details on remappings.

If there are multiple matches due to remappings, the one with the longest common prefix is selected.

If your contracts use libraries, you will notice that the bytecode contains substrings of the form __LibraryName______. You can use solc as a linker meaning that it will insert the library addresses for you at those points:

Either add --libraries "Math:0x12345678901234567890 Heap:0xabcdef0123456" to your command to provide an address for each library or store the string in a file (one library per line) and run solc using --libraries fileName.

If solc is called with the option --link, all input files are interpreted to be unlinked binaries (hex-encoded) in the __LibraryName____-format given above and are linked in-place (if the input is read from stdin, it is written to stdout). All options except --libraries are ignored (including -o) in this case.

Contract Metadata

The Solidity compiler automatically generates a JSON file, the contract metadata, that contains information about the current contract. It can be used to query the compiler version, the sources used, the ABI and NatSpec documentation in order to more safely interact with the contract and to verify its source code.

The compiler appends a Swarm hash of the metadata file to the end of the bytecode (for details, see below) of each contract, so that you can retrieve the file in an authenticated way without having to resort to a centralized data provider.

Of course, you have to publish the metadata file to Swarm (or some other service) so that others can access it. The file can be output by using solc --metadata and the file will be called ContractName_meta.json. It will contain Swarm references to the source code, so you have to upload all source files and the metadata file.

The metadata file has the following format. The example below is presented in a human-readable way. Properly formatted metadata should use quotes correctly, reduce whitespace to a minimum and sort the keys of all objects to arrive at a unique formatting. Comments are of course also not permitted and used here only for explanatory purposes.

{
  // Required: The version of the metadata format
  version: "1",
  // Required: Source code language, basically selects a "sub-version"
  // of the specification
  language: "Solidity",
  // Required: Details about the compiler, contents are specific
  // to the language.
  compiler: {
    // Required for Solidity: Version of the compiler
    version: "0.4.6+commit.2dabbdf0.Emscripten.clang",
    // Optional: Hash of the compiler binary which produced this output
    keccak256: "0x123..."
  },
  // Required: Compilation source files/source units, keys are file names
  sources:
  {
    "myFile.sol": {
      // Required: keccak256 hash of the source file
      "keccak256": "0x123...",
      // Required (unless "content" is used, see below): Sorted URL(s)
      // to the source file, protocol is more or less arbitrary, but a
      // Swarm URL is recommended
      "urls": [ "bzzr://56ab..." ]
    },
    "mortal": {
      // Required: keccak256 hash of the source file
      "keccak256": "0x234...",
      // Required (unless "url" is used): literal contents of the source file
      "content": "contract mortal is owned { function kill() { if (msg.sender == owner) selfdestruct(owner); } }"
    }
  },
  // Required: Compiler settings
  settings:
  {
    // Required for Solidity: Sorted list of remappings
    remappings: [ ":g/dir" ],
    // Optional: Optimizer settings (enabled defaults to false)
    optimizer: {
      enabled: true,
      runs: 500
    },
    // Required for Solidity: File and name of the contract or library this
    // metadata is created for.
    compilationTarget: {
      "myFile.sol": "MyContract"
    },
    // Required for Solidity: Addresses for libraries used
    libraries: {
      "MyLib": "0x123123..."
    }
  },
  // Required: Generated information about the contract.
  output:
  {
    // Required: ABI definition of the contract
    abi: [ ... ],
    // Required: NatSpec user documentation of the contract
    userdoc: [ ... ],
    // Required: NatSpec developer documentation of the contract
    devdoc: [ ... ],
  }
}

Encoding of the Metadata Hash in the Bytecode

Because we might support other ways to retrieve the metadata file in the future, the mapping {"bzzr0": <Swarm hash>} is stored [CBOR](https://tools.ietf.org/html/rfc7049)-encoded. Since the beginning of that encoding is not easy to find, its length is added in a two-byte big-endian encoding. The current version of the Solidity compiler thus adds the following to the end of the deployed bytecode:

0xa1 0x65 'b' 'z' 'z' 'r' '0' 0x58 0x20 <32 bytes swarm hash> 0x00 0x29

So in order to retrieve the data, the end of the deployed bytecode can be checked to match that pattern and use the Swarm hash to retrieve the file.

Usage for Automatic Interface Generation and NatSpec

The metadata is used in the following way: A component that wants to interact with a contract (e.g. Mist) retrieves the code of the contract, from that the Swarm hash of a file which is then retrieved. That file is JSON-decoded into a structure like above.

The component can then use the ABI to automatically generate a rudimentary user interface for the contract.

Furthermore, Mist can use the userdoc to display a confirmation message to the user whenever they interact with the contract.

Usage for Source Code Verification

In order to verify the compilation, sources can be retrieved from Swarm via the link in the metadata file. The compiler of the correct version (which is checked to be part of the “official” compilers) is invoked on that input with the specified settings. The resulting bytecode is compared to the data of the creation transaction or CREATE opcode data. This automatically verifies the metadata since its hash is part of the bytecode. Excess data corresponds to the constructor input data, which should be decoded according to the interface and presented to the user.

Tips and Tricks

  • Use delete on arrays to delete all its elements.
  • Use shorter types for struct elements and sort them such that short types are grouped together. This can lower the gas costs as multiple SSTORE operations might be combined into a single (SSTORE costs 5000 or 20000 gas, so this is what you want to optimise). Use the gas price estimator (with optimiser enabled) to check!
  • Make your state variables public - the compiler will create getters for you for free.
  • If you end up checking conditions on input or state a lot at the beginning of your functions, try using Function Modifiers.
  • If your contract has a function called send but you want to use the built-in send-function, use address(contractVariable).send(amount).
  • Initialise storage structs with a single assignment: x = MyStruct({a: 1, b: 2});

Cheatsheet

Order of Precedence of Operators

The following is the order of precedence for operators, listed in order of evaluation.

Precedence Description Operator
1 Postfix increment and decrement ++, --
Function-like call <func>(<args...>)
Array subscripting <array>[<index>]
Member access <object>.<member>
Parentheses (<statement>)
2 Prefix increment and decrement ++, --
Unary plus and minus +, -
Unary operations delete
Logical NOT !
Bitwise NOT ~
3 Exponentiation **
4 Multiplication, division and modulo *, /, %
5 Addition and subtraction +, -
6 Bitwise shift operators <<, >>
7 Bitwise AND &
8 Bitwise XOR ^
9 Bitwise OR |
10 Inequality operators <, >, <=, >=
11 Equality operators ==, !=
12 Logical AND &&
13 Logical OR ||
14 Ternary operator <conditional> ? <if-true> : <if-false>
15 Assignment operators =, |=, ^=, &=, <<=, >>=, +=, -=, *=, /=, %=
16 Comma operator ,

Global Variables

  • block.blockhash(uint blockNumber) returns (bytes32): hash of the given block - only works for 256 most recent blocks
  • block.coinbase (address): current block miner’s address
  • block.difficulty (uint): current block difficulty
  • block.gaslimit (uint): current block gaslimit
  • block.number (uint): current block number
  • block.timestamp (uint): current block timestamp
  • msg.data (bytes): complete calldata
  • msg.gas (uint): remaining gas
  • msg.sender (address): sender of the message (current call)
  • msg.value (uint): number of wei sent with the message
  • now (uint): current block timestamp (alias for block.timestamp)
  • tx.gasprice (uint): gas price of the transaction
  • tx.origin (address): sender of the transaction (full call chain)
  • keccak256(...) returns (bytes32): compute the Ethereum-SHA-3 (Keccak-256) hash of the (tightly packed) arguments
  • sha3(...) returns (bytes32): an alias to keccak256()
  • sha256(...) returns (bytes32): compute the SHA-256 hash of the (tightly packed) arguments
  • ripemd160(...) returns (bytes20): compute the RIPEMD-160 hash of the (tightly packed) arguments
  • ecrecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) returns (address): recover address associated with the public key from elliptic curve signature, return zero on error
  • addmod(uint x, uint y, uint k) returns (uint): compute (x + y) % k where the addition is performed with arbitrary precision and does not wrap around at 2**256
  • mulmod(uint x, uint y, uint k) returns (uint): compute (x * y) % k where the multiplication is performed with arbitrary precision and does not wrap around at 2**256
  • this (current contract’s type): the current contract, explicitly convertible to address
  • super: the contract one level higher in the inheritance hierarchy
  • selfdestruct(address recipient): destroy the current contract, sending its funds to the given address
  • <address>.balance (uint256): balance of the address in Wei
  • <address>.send(uint256 amount) returns (bool): send given amount of Wei to address, returns false on failure

Function Visibility Specifiers

function myFunction() <visibility specifier> returns (bool) {
    return true;
}
  • public: visible externally and internally (creates accessor function for storage/state variables)
  • private: only visible in the current contract
  • external: only visible externally (only for functions) - i.e. can only be message-called (via this.func)
  • internal: only visible internally

Modifiers

  • constant for state variables: Disallows assignment (except initialisation), does not occupy storage slot.
  • constant for functions: Disallows modification of state - this is not enforced yet.
  • anonymous for events: Does not store event signature as topic.
  • indexed for event parameters: Stores the parameter as topic.
  • payable for functions: Allows them to receive Ether together with a call.

Reserved Keywords

These keywords are reserved in Solidity. They might become part of the syntax in the future:

abstract, after, case, catch, default, final, in, inline, interface, let, match, null, of, pure, relocatable, static, switch, try, type, typeof, view.

Language Grammar

SourceUnit = (PragmaDirective | ImportDirective | ContractDefinition)*

// Pragma actually parses anything up to the trailing ';' to be fully forward-compatible.
PragmaDirective = 'pragma' Identifier ([^;]+) ';'

ImportDirective = 'import' StringLiteral ('as' Identifier)? ';'
        | 'import' ('*' | Identifier) ('as' Identifier)? 'from' StringLiteral ';'
        | 'import' '{' Identifier ('as' Identifier)? ( ',' Identifier ('as' Identifier)? )* '}' 'from' StringLiteral ';'

ContractDefinition = ( 'contract' | 'library' ) Identifier
                     ( 'is' InheritanceSpecifier (',' InheritanceSpecifier )* )?
                     '{' ContractPart* '}'

ContractPart = StateVariableDeclaration | UsingForDeclaration
             | StructDefinition | ModifierDefinition | FunctionDefinition | EventDefinition | EnumDefinition

InheritanceSpecifier = Identifier ( '(' Expression ( ',' Expression )* ')' )?

StateVariableDeclaration = TypeName ( 'public' | 'internal' | 'private' )? Identifier ('=' Expression)? ';'
UsingForDeclaration = 'using' Identifier 'for' ('*' | TypeName) ';'
StructDefinition = 'struct' Identifier '{'
                     ( VariableDeclaration ';' (VariableDeclaration ';')* )? '}'
ModifierDefinition = 'modifier' Identifier ParameterList? Block
FunctionDefinition = 'function' Identifier? ParameterList
                     ( FunctionCall | Identifier | 'constant' | 'payable' | 'external' | 'public' | 'internal' | 'private' )*
                     ( 'returns' ParameterList )? Block
EventDefinition = 'event' Identifier IndexedParameterList 'anonymous'? ';'

EnumValue = Identifier
EnumDefinition = 'enum' Identifier '{' EnumValue? (',' EnumValue)* '}'

IndexedParameterList = '(' ( TypeName 'indexed'? Identifier? (',' TypeName 'indexed'? Identifier?)* )? ')'
ParameterList =        '(' ( TypeName            Identifier? (',' TypeName            Identifier?)* )? ')'
TypeNameList =         '(' ( TypeName (',' TypeName )* )? ')'

// semantic restriction: mappings and structs (recursively) containing mappings
// are not allowed in argument lists
VariableDeclaration = TypeName Identifier
TypeName = ElementaryTypeName | Identifier StorageLocation? | Mapping | ArrayTypeName | FunctionTypeName
Mapping = 'mapping' '(' ElementaryTypeName '=>' TypeName ')'
ArrayTypeName = TypeName StorageLocation? '[' Expression? ']'
FunctionTypeName = 'function' TypeNameList ( 'internal' | 'external' | 'constant' | 'payable' )*
                   ( 'returns' TypeNameList )?
StorageLocation = 'memory' | 'storage'

Block = '{' Statement* '}'
Statement = IfStatement | WhileStatement | ForStatement | Block | InlineAssemblyStatement |
            ( DoWhileStatement | PlaceholderStatement | Continue | Break | Return |
              Throw | SimpleStatement ) ';'

ExpressionStatement = Expression
IfStatement = 'if' '(' Expression ')' Statement ( 'else' Statement )?
WhileStatement = 'while' '(' Expression ')' Statement
PlaceholderStatement = '_'
SimpleStatement = VariableDefinition | ExpressionStatement
ForStatement = 'for' '(' (SimpleStatement)? ';' (Expression)? ';' (ExpressionStatement)? ')' Statement
InlineAssemblyStatement = 'assembly' InlineAssemblyBlock
DoWhileStatement = 'do' Statement 'while' '(' Expression ')'
Continue = 'continue'
Break = 'break'
Return = 'return' Expression?
Throw = 'throw'
VariableDefinition = VariableDeclaration ( '=' Expression )?

// Precedence by order (see github.com/ethereum/solidity/pull/732)
Expression =
  ( Expression ('++' | '--') | FunctionCall | IndexAccess | MemberAccess | '(' Expression ')' )
  | ('!' | '~' | 'delete' | '++' | '--' | '+' | '-') Expression
  | Expression '**' Expression
  | Expression ('*' | '/' | '%') Expression
  | Expression ('+' | '-') Expression
  | Expression ('<<' | '>>')
  | Expression '&' Expression
  | Expression '^' Expression
  | Expression '|' Expression
  | Expression ('<' | '>' | '<=' | '>=') Expression
  | Expression ('==' | '!=') Expression
  | Expression '&&' Expression
  | Expression '||' Expression
  | Expression '?' Expression ':' Expression
  | Expression ('=' | '|=' | '^=' | '&=' | '<<=' | '>>=' | '+=' | '-=' | '*=' | '/=' | '%=') Expression
  | Expression? (',' Expression)
  | PrimaryExpression

PrimaryExpression = Identifier | BooleanLiteral | NumberLiteral | HexLiteral | StringLiteral

FunctionCall = ( PrimaryExpression | NewExpression | TypeName ) ( ( '.' Identifier ) | ( '[' Expression ']' ) )* '(' Expression? ( ',' Expression )* ')'
NewExpression = 'new' Identifier
MemberAccess = Expression '.' Identifier
IndexAccess = Expression '[' Expression? ']'

BooleanLiteral = 'true' | 'false'
NumberLiteral = '0x'? [0-9]+ (' ' NumberUnit)?
NumberUnit = 'wei' | 'szabo' | 'finney' | 'ether'
           | 'seconds' | 'minutes' | 'hours' | 'days' | 'weeks' | 'years'
HexLiteral = 'hex' ('"' ([0-9a-fA-F]{2})* '"' | '\'' ([0-9a-fA-F]{2})* '\'')
StringLiteral = '"' ([^"\r\n\\] | '\\' .)* '"'
Identifier = [a-zA-Z_] [a-zA-Z_0-9]*

ElementaryTypeName = 'address' | 'bool' | 'string' | 'var'
                   | Int | Uint | Byte | Fixed | Ufixed

Int = 'int' | 'int8' | 'int16' | 'int24' | 'int32' | 'int40' | 'int48' | 'int56' | 'int64' | 'int72' | 'int80' | 'int88' | 'int96' | 'int104' | 'int112' | 'int120' | 'int128' | 'int136' | 'int144' | 'int152' | 'int160' | 'int168' | 'int176' | 'int184' | 'int192' | 'int200' | 'int208' | 'int216' | 'int224' | 'int232' | 'int240' | 'int248' | 'int256'

Uint = 'uint' | 'uint8' | 'uint16' | 'uint24' | 'uint32' | 'uint40' | 'uint48' | 'uint56' | 'uint64' | 'uint72' | 'uint80' | 'uint88' | 'uint96' | 'uint104' | 'uint112' | 'uint120' | 'uint128' | 'uint136' | 'uint144' | 'uint152' | 'uint160' | 'uint168' | 'uint176' | 'uint184' | 'uint192' | 'uint200' | 'uint208' | 'uint216' | 'uint224' | 'uint232' | 'uint240' | 'uint248' | 'uint256'

Byte = 'byte' | 'bytes' | 'bytes1' | 'bytes2' | 'bytes3' | 'bytes4' | 'bytes5' | 'bytes6' | 'bytes7' | 'bytes8' | 'bytes9' | 'bytes10' | 'bytes11' | 'bytes12' | 'bytes13' | 'bytes14' | 'bytes15' | 'bytes16' | 'bytes17' | 'bytes18' | 'bytes19' | 'bytes20' | 'bytes21' | 'bytes22' | 'bytes23' | 'bytes24' | 'bytes25' | 'bytes26' | 'bytes27' | 'bytes28' | 'bytes29' | 'bytes30' | 'bytes31' | 'bytes32'

Fixed = 'fixed' | 'fixed0x8' | 'fixed0x16' | 'fixed0x24' | 'fixed0x32' | 'fixed0x40' | 'fixed0x48' | 'fixed0x56' | 'fixed0x64' | 'fixed0x72' | 'fixed0x80' | 'fixed0x88' | 'fixed0x96' | 'fixed0x104' | 'fixed0x112' | 'fixed0x120' | 'fixed0x128' | 'fixed0x136' | 'fixed0x144' | 'fixed0x152' | 'fixed0x160' | 'fixed0x168' | 'fixed0x176' | 'fixed0x184' | 'fixed0x192' | 'fixed0x200' | 'fixed0x208' | 'fixed0x216' | 'fixed0x224' | 'fixed0x232' | 'fixed0x240' | 'fixed0x248' | 'fixed0x256' | 'fixed8x8' | 'fixed8x16' | 'fixed8x24' | 'fixed8x32' | 'fixed8x40' | 'fixed8x48' | 'fixed8x56' | 'fixed8x64' | 'fixed8x72' | 'fixed8x80' | 'fixed8x88' | 'fixed8x96' | 'fixed8x104' | 'fixed8x112' | 'fixed8x120' | 'fixed8x128' | 'fixed8x136' | 'fixed8x144' | 'fixed8x152' | 'fixed8x160' | 'fixed8x168' | 'fixed8x176' | 'fixed8x184' | 'fixed8x192' | 'fixed8x200' | 'fixed8x208' | 'fixed8x216' | 'fixed8x224' | 'fixed8x232' | 'fixed8x240' | 'fixed8x248' | 'fixed16x8' | 'fixed16x16' | 'fixed16x24' | 'fixed16x32' | 'fixed16x40' | 'fixed16x48' | 'fixed16x56' | 'fixed16x64' | 'fixed16x72' | 'fixed16x80' | 'fixed16x88' | 'fixed16x96' | 'fixed16x104' | 'fixed16x112' | 'fixed16x120' | 'fixed16x128' | 'fixed16x136' | 'fixed16x144' | 'fixed16x152' | 'fixed16x160' | 'fixed16x168' | 'fixed16x176' | 'fixed16x184' | 'fixed16x192' | 'fixed16x200' | 'fixed16x208' | 'fixed16x216' | 'fixed16x224' | 'fixed16x232' | 'fixed16x240' | 'fixed24x8' | 'fixed24x16' | 'fixed24x24' | 'fixed24x32' | 'fixed24x40' | 'fixed24x48' | 'fixed24x56' | 'fixed24x64' | 'fixed24x72' | 'fixed24x80' | 'fixed24x88' | 'fixed24x96' | 'fixed24x104' | 'fixed24x112' | 'fixed24x120' | 'fixed24x128' | 'fixed24x136' | 'fixed24x144' | 'fixed24x152' | 'fixed24x160' | 'fixed24x168' | 'fixed24x176' | 'fixed24x184' | 'fixed24x192' | 'fixed24x200' | 'fixed24x208' | 'fixed24x216' | 'fixed24x224' | 'fixed24x232' | 'fixed32x8' | 'fixed32x16' | 'fixed32x24' | 'fixed32x32' | 'fixed32x40' | 'fixed32x48' | 'fixed32x56' | 'fixed32x64' | 'fixed32x72' | 'fixed32x80' | 'fixed32x88' | 'fixed32x96' | 'fixed32x104' | 'fixed32x112' | 'fixed32x120' | 'fixed32x128' | 'fixed32x136' | 'fixed32x144' | 'fixed32x152' | 'fixed32x160' | 'fixed32x168' | 'fixed32x176' | 'fixed32x184' | 'fixed32x192' | 'fixed32x200' | 'fixed32x208' | 'fixed32x216' | 'fixed32x224' | 'fixed40x8' | 'fixed40x16' | 'fixed40x24' | 'fixed40x32' | 'fixed40x40' | 'fixed40x48' | 'fixed40x56' | 'fixed40x64' | 'fixed40x72' | 'fixed40x80' | 'fixed40x88' | 'fixed40x96' | 'fixed40x104' | 'fixed40x112' | 'fixed40x120' | 'fixed40x128' | 'fixed40x136' | 'fixed40x144' | 'fixed40x152' | 'fixed40x160' | 'fixed40x168' | 'fixed40x176' | 'fixed40x184' | 'fixed40x192' | 'fixed40x200' | 'fixed40x208' | 'fixed40x216' | 'fixed48x8' | 'fixed48x16' | 'fixed48x24' | 'fixed48x32' | 'fixed48x40' | 'fixed48x48' | 'fixed48x56' | 'fixed48x64' | 'fixed48x72' | 'fixed48x80' | 'fixed48x88' | 'fixed48x96' | 'fixed48x104' | 'fixed48x112' | 'fixed48x120' | 'fixed48x128' | 'fixed48x136' | 'fixed48x144' | 'fixed48x152' | 'fixed48x160' | 'fixed48x168' | 'fixed48x176' | 'fixed48x184' | 'fixed48x192' | 'fixed48x200' | 'fixed48x208' | 'fixed56x8' | 'fixed56x16' | 'fixed56x24' | 'fixed56x32' | 'fixed56x40' | 'fixed56x48' | 'fixed56x56' | 'fixed56x64' | 'fixed56x72' | 'fixed56x80' | 'fixed56x88' | 'fixed56x96' | 'fixed56x104' | 'fixed56x112' | 'fixed56x120' | 'fixed56x128' | 'fixed56x136' | 'fixed56x144' | 'fixed56x152' | 'fixed56x160' | 'fixed56x168' | 'fixed56x176' | 'fixed56x184' | 'fixed56x192' | 'fixed56x200' | 'fixed64x8' | 'fixed64x16' | 'fixed64x24' | 'fixed64x32' | 'fixed64x40' | 'fixed64x48' | 'fixed64x56' | 'fixed64x64' | 'fixed64x72' | 'fixed64x80' | 'fixed64x88' | 'fixed64x96' | 'fixed64x104' | 'fixed64x112' | 'fixed64x120' | 'fixed64x128' | 'fixed64x136' | 'fixed64x144' | 'fixed64x152' | 'fixed64x160' | 'fixed64x168' | 'fixed64x176' | 'fixed64x184' | 'fixed64x192' | 'fixed72x8' | 'fixed72x16' | 'fixed72x24' | 'fixed72x32' | 'fixed72x40' | 'fixed72x48' | 'fixed72x56' | 'fixed72x64' | 'fixed72x72' | 'fixed72x80' | 'fixed72x88' | 'fixed72x96' | 'fixed72x104' | 'fixed72x112' | 'fixed72x120' | 'fixed72x128' | 'fixed72x136' | 'fixed72x144' | 'fixed72x152' | 'fixed72x160' | 'fixed72x168' | 'fixed72x176' | 'fixed72x184' | 'fixed80x8' | 'fixed80x16' | 'fixed80x24' | 'fixed80x32' | 'fixed80x40' | 'fixed80x48' | 'fixed80x56' | 'fixed80x64' | 'fixed80x72' | 'fixed80x80' | 'fixed80x88' | 'fixed80x96' | 'fixed80x104' | 'fixed80x112' | 'fixed80x120' | 'fixed80x128' | 'fixed80x136' | 'fixed80x144' | 'fixed80x152' | 'fixed80x160' | 'fixed80x168' | 'fixed80x176' | 'fixed88x8' | 'fixed88x16' | 'fixed88x24' | 'fixed88x32' | 'fixed88x40' | 'fixed88x48' | 'fixed88x56' | 'fixed88x64' | 'fixed88x72' | 'fixed88x80' | 'fixed88x88' | 'fixed88x96' | 'fixed88x104' | 'fixed88x112' | 'fixed88x120' | 'fixed88x128' | 'fixed88x136' | 'fixed88x144' | 'fixed88x152' | 'fixed88x160' | 'fixed88x168' | 'fixed96x8' | 'fixed96x16' | 'fixed96x24' | 'fixed96x32' | 'fixed96x40' | 'fixed96x48' | 'fixed96x56' | 'fixed96x64' | 'fixed96x72' | 'fixed96x80' | 'fixed96x88' | 'fixed96x96' | 'fixed96x104' | 'fixed96x112' | 'fixed96x120' | 'fixed96x128' | 'fixed96x136' | 'fixed96x144' | 'fixed96x152' | 'fixed96x160' | 'fixed104x8' | 'fixed104x16' | 'fixed104x24' | 'fixed104x32' | 'fixed104x40' | 'fixed104x48' | 'fixed104x56' | 'fixed104x64' | 'fixed104x72' | 'fixed104x80' | 'fixed104x88' | 'fixed104x96' | 'fixed104x104' | 'fixed104x112' | 'fixed104x120' | 'fixed104x128' | 'fixed104x136' | 'fixed104x144' | 'fixed104x152' | 'fixed112x8' | 'fixed112x16' | 'fixed112x24' | 'fixed112x32' | 'fixed112x40' | 'fixed112x48' | 'fixed112x56' | 'fixed112x64' | 'fixed112x72' | 'fixed112x80' | 'fixed112x88' | 'fixed112x96' | 'fixed112x104' | 'fixed112x112' | 'fixed112x120' | 'fixed112x128' | 'fixed112x136' | 'fixed112x144' | 'fixed120x8' | 'fixed120x16' | 'fixed120x24' | 'fixed120x32' | 'fixed120x40' | 'fixed120x48' | 'fixed120x56' | 'fixed120x64' | 'fixed120x72' | 'fixed120x80' | 'fixed120x88' | 'fixed120x96' | 'fixed120x104' | 'fixed120x112' | 'fixed120x120' | 'fixed120x128' | 'fixed120x136' | 'fixed128x8' | 'fixed128x16' | 'fixed128x24' | 'fixed128x32' | 'fixed128x40' | 'fixed128x48' | 'fixed128x56' | 'fixed128x64' | 'fixed128x72' | 'fixed128x80' | 'fixed128x88' | 'fixed128x96' | 'fixed128x104' | 'fixed128x112' | 'fixed128x120' | 'fixed128x128' | 'fixed136x8' | 'fixed136x16' | 'fixed136x24' | 'fixed136x32' | 'fixed136x40' | 'fixed136x48' | 'fixed136x56' | 'fixed136x64' | 'fixed136x72' | 'fixed136x80' | 'fixed136x88' | 'fixed136x96' | 'fixed136x104' | 'fixed136x112' | 'fixed136x120' | 'fixed144x8' | 'fixed144x16' | 'fixed144x24' | 'fixed144x32' | 'fixed144x40' | 'fixed144x48' | 'fixed144x56' | 'fixed144x64' | 'fixed144x72' | 'fixed144x80' | 'fixed144x88' | 'fixed144x96' | 'fixed144x104' | 'fixed144x112' | 'fixed152x8' | 'fixed152x16' | 'fixed152x24' | 'fixed152x32' | 'fixed152x40' | 'fixed152x48' | 'fixed152x56' | 'fixed152x64' | 'fixed152x72' | 'fixed152x80' | 'fixed152x88' | 'fixed152x96' | 'fixed152x104' | 'fixed160x8' | 'fixed160x16' | 'fixed160x24' | 'fixed160x32' | 'fixed160x40' | 'fixed160x48' | 'fixed160x56' | 'fixed160x64' | 'fixed160x72' | 'fixed160x80' | 'fixed160x88' | 'fixed160x96' | 'fixed168x8' | 'fixed168x16' | 'fixed168x24' | 'fixed168x32' | 'fixed168x40' | 'fixed168x48' | 'fixed168x56' | 'fixed168x64' | 'fixed168x72' | 'fixed168x80' | 'fixed168x88' | 'fixed176x8' | 'fixed176x16' | 'fixed176x24' | 'fixed176x32' | 'fixed176x40' | 'fixed176x48' | 'fixed176x56' | 'fixed176x64' | 'fixed176x72' | 'fixed176x80' | 'fixed184x8' | 'fixed184x16' | 'fixed184x24' | 'fixed184x32' | 'fixed184x40' | 'fixed184x48' | 'fixed184x56' | 'fixed184x64' | 'fixed184x72' | 'fixed192x8' | 'fixed192x16' | 'fixed192x24' | 'fixed192x32' | 'fixed192x40' | 'fixed192x48' | 'fixed192x56' | 'fixed192x64' | 'fixed200x8' | 'fixed200x16' | 'fixed200x24' | 'fixed200x32' | 'fixed200x40' | 'fixed200x48' | 'fixed200x56' | 'fixed208x8' | 'fixed208x16' | 'fixed208x24' | 'fixed208x32' | 'fixed208x40' | 'fixed208x48' | 'fixed216x8' | 'fixed216x16' | 'fixed216x24' | 'fixed216x32' | 'fixed216x40' | 'fixed224x8' | 'fixed224x16' | 'fixed224x24' | 'fixed224x32' | 'fixed232x8' | 'fixed232x16' | 'fixed232x24' | 'fixed240x8' | 'fixed240x16' | 'fixed248x8'

Ufixed = 'ufixed' | 'ufixed0x8' | 'ufixed0x16' | 'ufixed0x24' | 'ufixed0x32' | 'ufixed0x40' | 'ufixed0x48' | 'ufixed0x56' | 'ufixed0x64' | 'ufixed0x72' | 'ufixed0x80' | 'ufixed0x88' | 'ufixed0x96' | 'ufixed0x104' | 'ufixed0x112' | 'ufixed0x120' | 'ufixed0x128' | 'ufixed0x136' | 'ufixed0x144' | 'ufixed0x152' | 'ufixed0x160' | 'ufixed0x168' | 'ufixed0x176' | 'ufixed0x184' | 'ufixed0x192' | 'ufixed0x200' | 'ufixed0x208' | 'ufixed0x216' | 'ufixed0x224' | 'ufixed0x232' | 'ufixed0x240' | 'ufixed0x248' | 'ufixed0x256' | 'ufixed8x8' | 'ufixed8x16' | 'ufixed8x24' | 'ufixed8x32' | 'ufixed8x40' | 'ufixed8x48' | 'ufixed8x56' | 'ufixed8x64' | 'ufixed8x72' | 'ufixed8x80' | 'ufixed8x88' | 'ufixed8x96' | 'ufixed8x104' | 'ufixed8x112' | 'ufixed8x120' | 'ufixed8x128' | 'ufixed8x136' | 'ufixed8x144' | 'ufixed8x152' | 'ufixed8x160' | 'ufixed8x168' | 'ufixed8x176' | 'ufixed8x184' | 'ufixed8x192' | 'ufixed8x200' | 'ufixed8x208' | 'ufixed8x216' | 'ufixed8x224' | 'ufixed8x232' | 'ufixed8x240' | 'ufixed8x248' | 'ufixed16x8' | 'ufixed16x16' | 'ufixed16x24' | 'ufixed16x32' | 'ufixed16x40' | 'ufixed16x48' | 'ufixed16x56' | 'ufixed16x64' | 'ufixed16x72' | 'ufixed16x80' | 'ufixed16x88' | 'ufixed16x96' | 'ufixed16x104' | 'ufixed16x112' | 'ufixed16x120' | 'ufixed16x128' | 'ufixed16x136' | 'ufixed16x144' | 'ufixed16x152' | 'ufixed16x160' | 'ufixed16x168' | 'ufixed16x176' | 'ufixed16x184' | 'ufixed16x192' | 'ufixed16x200' | 'ufixed16x208' | 'ufixed16x216' | 'ufixed16x224' | 'ufixed16x232' | 'ufixed16x240' | 'ufixed24x8' | 'ufixed24x16' | 'ufixed24x24' | 'ufixed24x32' | 'ufixed24x40' | 'ufixed24x48' | 'ufixed24x56' | 'ufixed24x64' | 'ufixed24x72' | 'ufixed24x80' | 'ufixed24x88' | 'ufixed24x96' | 'ufixed24x104' | 'ufixed24x112' | 'ufixed24x120' | 'ufixed24x128' | 'ufixed24x136' | 'ufixed24x144' | 'ufixed24x152' | 'ufixed24x160' | 'ufixed24x168' | 'ufixed24x176' | 'ufixed24x184' | 'ufixed24x192' | 'ufixed24x200' | 'ufixed24x208' | 'ufixed24x216' | 'ufixed24x224' | 'ufixed24x232' | 'ufixed32x8' | 'ufixed32x16' | 'ufixed32x24' | 'ufixed32x32' | 'ufixed32x40' | 'ufixed32x48' | 'ufixed32x56' | 'ufixed32x64' | 'ufixed32x72' | 'ufixed32x80' | 'ufixed32x88' | 'ufixed32x96' | 'ufixed32x104' | 'ufixed32x112' | 'ufixed32x120' | 'ufixed32x128' | 'ufixed32x136' | 'ufixed32x144' | 'ufixed32x152' | 'ufixed32x160' | 'ufixed32x168' | 'ufixed32x176' | 'ufixed32x184' | 'ufixed32x192' | 'ufixed32x200' | 'ufixed32x208' | 'ufixed32x216' | 'ufixed32x224' | 'ufixed40x8' | 'ufixed40x16' | 'ufixed40x24' | 'ufixed40x32' | 'ufixed40x40' | 'ufixed40x48' | 'ufixed40x56' | 'ufixed40x64' | 'ufixed40x72' | 'ufixed40x80' | 'ufixed40x88' | 'ufixed40x96' | 'ufixed40x104' | 'ufixed40x112' | 'ufixed40x120' | 'ufixed40x128' | 'ufixed40x136' | 'ufixed40x144' | 'ufixed40x152' | 'ufixed40x160' | 'ufixed40x168' | 'ufixed40x176' | 'ufixed40x184' | 'ufixed40x192' | 'ufixed40x200' | 'ufixed40x208' | 'ufixed40x216' | 'ufixed48x8' | 'ufixed48x16' | 'ufixed48x24' | 'ufixed48x32' | 'ufixed48x40' | 'ufixed48x48' | 'ufixed48x56' | 'ufixed48x64' | 'ufixed48x72' | 'ufixed48x80' | 'ufixed48x88' | 'ufixed48x96' | 'ufixed48x104' | 'ufixed48x112' | 'ufixed48x120' | 'ufixed48x128' | 'ufixed48x136' | 'ufixed48x144' | 'ufixed48x152' | 'ufixed48x160' | 'ufixed48x168' | 'ufixed48x176' | 'ufixed48x184' | 'ufixed48x192' | 'ufixed48x200' | 'ufixed48x208' | 'ufixed56x8' | 'ufixed56x16' | 'ufixed56x24' | 'ufixed56x32' | 'ufixed56x40' | 'ufixed56x48' | 'ufixed56x56' | 'ufixed56x64' | 'ufixed56x72' | 'ufixed56x80' | 'ufixed56x88' | 'ufixed56x96' | 'ufixed56x104' | 'ufixed56x112' | 'ufixed56x120' | 'ufixed56x128' | 'ufixed56x136' | 'ufixed56x144' | 'ufixed56x152' | 'ufixed56x160' | 'ufixed56x168' | 'ufixed56x176' | 'ufixed56x184' | 'ufixed56x192' | 'ufixed56x200' | 'ufixed64x8' | 'ufixed64x16' | 'ufixed64x24' | 'ufixed64x32' | 'ufixed64x40' | 'ufixed64x48' | 'ufixed64x56' | 'ufixed64x64' | 'ufixed64x72' | 'ufixed64x80' | 'ufixed64x88' | 'ufixed64x96' | 'ufixed64x104' | 'ufixed64x112' | 'ufixed64x120' | 'ufixed64x128' | 'ufixed64x136' | 'ufixed64x144' | 'ufixed64x152' | 'ufixed64x160' | 'ufixed64x168' | 'ufixed64x176' | 'ufixed64x184' | 'ufixed64x192' | 'ufixed72x8' | 'ufixed72x16' | 'ufixed72x24' | 'ufixed72x32' | 'ufixed72x40' | 'ufixed72x48' | 'ufixed72x56' | 'ufixed72x64' | 'ufixed72x72' | 'ufixed72x80' | 'ufixed72x88' | 'ufixed72x96' | 'ufixed72x104' | 'ufixed72x112' | 'ufixed72x120' | 'ufixed72x128' | 'ufixed72x136' | 'ufixed72x144' | 'ufixed72x152' | 'ufixed72x160' | 'ufixed72x168' | 'ufixed72x176' | 'ufixed72x184' | 'ufixed80x8' | 'ufixed80x16' | 'ufixed80x24' | 'ufixed80x32' | 'ufixed80x40' | 'ufixed80x48' | 'ufixed80x56' | 'ufixed80x64' | 'ufixed80x72' | 'ufixed80x80' | 'ufixed80x88' | 'ufixed80x96' | 'ufixed80x104' | 'ufixed80x112' | 'ufixed80x120' | 'ufixed80x128' | 'ufixed80x136' | 'ufixed80x144' | 'ufixed80x152' | 'ufixed80x160' | 'ufixed80x168' | 'ufixed80x176' | 'ufixed88x8' | 'ufixed88x16' | 'ufixed88x24' | 'ufixed88x32' | 'ufixed88x40' | 'ufixed88x48' | 'ufixed88x56' | 'ufixed88x64' | 'ufixed88x72' | 'ufixed88x80' | 'ufixed88x88' | 'ufixed88x96' | 'ufixed88x104' | 'ufixed88x112' | 'ufixed88x120' | 'ufixed88x128' | 'ufixed88x136' | 'ufixed88x144' | 'ufixed88x152' | 'ufixed88x160' | 'ufixed88x168' | 'ufixed96x8' | 'ufixed96x16' | 'ufixed96x24' | 'ufixed96x32' | 'ufixed96x40' | 'ufixed96x48' | 'ufixed96x56' | 'ufixed96x64' | 'ufixed96x72' | 'ufixed96x80' | 'ufixed96x88' | 'ufixed96x96' | 'ufixed96x104' | 'ufixed96x112' | 'ufixed96x120' | 'ufixed96x128' | 'ufixed96x136' | 'ufixed96x144' | 'ufixed96x152' | 'ufixed96x160' | 'ufixed104x8' | 'ufixed104x16' | 'ufixed104x24' | 'ufixed104x32' | 'ufixed104x40' | 'ufixed104x48' | 'ufixed104x56' | 'ufixed104x64' | 'ufixed104x72' | 'ufixed104x80' | 'ufixed104x88' | 'ufixed104x96' | 'ufixed104x104' | 'ufixed104x112' | 'ufixed104x120' | 'ufixed104x128' | 'ufixed104x136' | 'ufixed104x144' | 'ufixed104x152' | 'ufixed112x8' | 'ufixed112x16' | 'ufixed112x24' | 'ufixed112x32' | 'ufixed112x40' | 'ufixed112x48' | 'ufixed112x56' | 'ufixed112x64' | 'ufixed112x72' | 'ufixed112x80' | 'ufixed112x88' | 'ufixed112x96' | 'ufixed112x104' | 'ufixed112x112' | 'ufixed112x120' | 'ufixed112x128' | 'ufixed112x136' | 'ufixed112x144' | 'ufixed120x8' | 'ufixed120x16' | 'ufixed120x24' | 'ufixed120x32' | 'ufixed120x40' | 'ufixed120x48' | 'ufixed120x56' | 'ufixed120x64' | 'ufixed120x72' | 'ufixed120x80' | 'ufixed120x88' | 'ufixed120x96' | 'ufixed120x104' | 'ufixed120x112' | 'ufixed120x120' | 'ufixed120x128' | 'ufixed120x136' | 'ufixed128x8' | 'ufixed128x16' | 'ufixed128x24' | 'ufixed128x32' | 'ufixed128x40' | 'ufixed128x48' | 'ufixed128x56' | 'ufixed128x64' | 'ufixed128x72' | 'ufixed128x80' | 'ufixed128x88' | 'ufixed128x96' | 'ufixed128x104' | 'ufixed128x112' | 'ufixed128x120' | 'ufixed128x128' | 'ufixed136x8' | 'ufixed136x16' | 'ufixed136x24' | 'ufixed136x32' | 'ufixed136x40' | 'ufixed136x48' | 'ufixed136x56' | 'ufixed136x64' | 'ufixed136x72' | 'ufixed136x80' | 'ufixed136x88' | 'ufixed136x96' | 'ufixed136x104' | 'ufixed136x112' | 'ufixed136x120' | 'ufixed144x8' | 'ufixed144x16' | 'ufixed144x24' | 'ufixed144x32' | 'ufixed144x40' | 'ufixed144x48' | 'ufixed144x56' | 'ufixed144x64' | 'ufixed144x72' | 'ufixed144x80' | 'ufixed144x88' | 'ufixed144x96' | 'ufixed144x104' | 'ufixed144x112' | 'ufixed152x8' | 'ufixed152x16' | 'ufixed152x24' | 'ufixed152x32' | 'ufixed152x40' | 'ufixed152x48' | 'ufixed152x56' | 'ufixed152x64' | 'ufixed152x72' | 'ufixed152x80' | 'ufixed152x88' | 'ufixed152x96' | 'ufixed152x104' | 'ufixed160x8' | 'ufixed160x16' | 'ufixed160x24' | 'ufixed160x32' | 'ufixed160x40' | 'ufixed160x48' | 'ufixed160x56' | 'ufixed160x64' | 'ufixed160x72' | 'ufixed160x80' | 'ufixed160x88' | 'ufixed160x96' | 'ufixed168x8' | 'ufixed168x16' | 'ufixed168x24' | 'ufixed168x32' | 'ufixed168x40' | 'ufixed168x48' | 'ufixed168x56' | 'ufixed168x64' | 'ufixed168x72' | 'ufixed168x80' | 'ufixed168x88' | 'ufixed176x8' | 'ufixed176x16' | 'ufixed176x24' | 'ufixed176x32' | 'ufixed176x40' | 'ufixed176x48' | 'ufixed176x56' | 'ufixed176x64' | 'ufixed176x72' | 'ufixed176x80' | 'ufixed184x8' | 'ufixed184x16' | 'ufixed184x24' | 'ufixed184x32' | 'ufixed184x40' | 'ufixed184x48' | 'ufixed184x56' | 'ufixed184x64' | 'ufixed184x72' | 'ufixed192x8' | 'ufixed192x16' | 'ufixed192x24' | 'ufixed192x32' | 'ufixed192x40' | 'ufixed192x48' | 'ufixed192x56' | 'ufixed192x64' | 'ufixed200x8' | 'ufixed200x16' | 'ufixed200x24' | 'ufixed200x32' | 'ufixed200x40' | 'ufixed200x48' | 'ufixed200x56' | 'ufixed208x8' | 'ufixed208x16' | 'ufixed208x24' | 'ufixed208x32' | 'ufixed208x40' | 'ufixed208x48' | 'ufixed216x8' | 'ufixed216x16' | 'ufixed216x24' | 'ufixed216x32' | 'ufixed216x40' | 'ufixed224x8' | 'ufixed224x16' | 'ufixed224x24' | 'ufixed224x32' | 'ufixed232x8' | 'ufixed232x16' | 'ufixed232x24' | 'ufixed240x8' | 'ufixed240x16' | 'ufixed248x8'

InlineAssemblyBlock = '{' AssemblyItem* '}'

AssemblyItem = Identifier | FunctionalAssemblyExpression | InlineAssemblyBlock | AssemblyLocalBinding | AssemblyAssignment | NumberLiteral | StringLiteral | HexLiteral
AssemblyLocalBinding = 'let' Identifier ':=' FunctionalAssemblyExpression
AssemblyAssignment = Identifier ':=' FunctionalAssemblyExpression | '=:' Identifier
FunctionalAssemblyExpression = Identifier '(' AssemblyItem? ( ',' AssemblyItem )* ')'